This will show you how to make effective and cool looking stairs.

1.) The frist stair case is a normal stair case. Its is made by making 
a large air brush (H=20, D=16 W=12). After thats in place 2 wedges are
made and put on the top and bottom of the air brush. NOTE: The wedges
MUST be half of the hight of the air brush( Air brush= 20h Wedge=10)
The wedges must also be Fill Soild. Then come the stairs, Frist it 
is a Fill Air Brush that is .75 in hight and 1 in depth, the width 
should match that of the wedge and large air brush. Then the smaller 
air brushes (stair brush) are placed down, 2 corrners on the stair 
brush should be aligned with the wedge. The stair brushes should then
be clone then raised and moved back to form anothe stair brush.

2.) This stair case is built in the same way as #1 but it dose not have
the 2 Fill solid wedge brush on the top of the Fill air cube brush.
These types of stair cases are good for puttind a look out point or a
banner. It can also have a belcony/hallway on the top so passing guards
can watch the stair case.

3.) This is a stair case you see most oftern in thief. To do this just 
build a stair case the same as #1. After its built just muiltbrush the 
stair brushes and raise the up to the upper wedge.


      These are just a few of the stair cases that can be built using 
      dromed. I might update this file to include some more ways when 
      I get time.

    shadowthief
